page_banner

product

Channel Drawer Slide Roll Forming Machine

This slide rail assembly is composed of three layers of skeleton cold-formed parts “1″, “2″, and “3″, as well as balls and cages in the middle. The three layers of skeletons “1″, “2″, and “3″ can be composed of Fast Changing Telescopic Channel Drawer Slide Roll Forming Machine production.


  • youtube
  • facebook
  • twitter

Product Detail

Contact us

BRIEF INTRODUCTION

This slide rail assembly is composed of three layers of skeleton cold-formed parts "1", "2", and "3", as well as balls and cages in the middle. The three layers of skeletons "1", "2", and "3" can be composed of Fast Changing Telescopic Channel Drawer Slide Roll Forming Machine production.

1 (1)

MAIN TECHNICAL PARAMETERS

Material quality: cold rolled steel, Galvanized steel, stainless steel

Yield strength of raw materials: 235Mpa

Coil outer diameter: ≤Ф1200 mm

Inner diameter of coil: Ф508mm

Strip width: ≤100mm

Strip thickness: 1.2mm, 1.2mm, 1.5mm

Single coil weight: ≤2500 kg

MACHINE CONFIGURATION&SPECIFICATIONS

1. MANUAL UNCOILER 1SET
This machine is in single-head mode.

2. LEVELING 1 SET
It adopts 7 rollers for leveling, 2 pairs of guide rollers, and the feed rollers are pneumatically clamped and controlled by a servo motor.

3. 163T PUNCHING PRESS 1 SET
The punching distance is adjustable in the transverse direction of the plate, and the punching step can be changed through the electrical control system. each length specification is equipped with 1 set of dies separately.

4. FAST CHANGING ROLL FORMING UNIT 1 SET
When replacing products with different specifications, only the part of the partition sleeve needs to be replaced, and the product can be replaced quickly

Parameters:
No. of forming passes: 12
Archway number: 10+12+8=30
Shaft diameter of forming machine: φ50mm (subject to final design)
Motor power: about 7.5kW (subject to the final design)
Maximum linear speed:  10~15m/min

5. SERVO TRACKING CUTTING 1 SET
Use servo tracking to cut off, fast speed and high efficiency.Cutter material: Cr12MoV (hardness after quenching is HRC58~62)

6. ELECTRICAL CONTROL UNIT  1 SET
The whole line adopts the man-machine control mode combining PLC and touch screen. The specification parameters, quantity and system parameters of the parts can be set through the touch screen.

Brand of main electrical components

1. PLC Mitsubishi,Japan
2. Servo Motor Yaskawa,Japan
3. Inverter Delta (Taiwan, China)
4. Touch screen Vinylon (Taiwan, China)

 

7. HYDRAULIC STATIONS 1 SET
The main components are: oil pump, motor, hydraulic valve, solenoid valve, filter and hydraulic oil tank, etc.

PRODUCTION PROCESS

Uncoiling → Leveling Servo Feeding → Punching → Cold Roll Forming → Servo Tracking Cutting → Discharging

WORKPIECE SAMPLES

Drawer slides roll forming machine;drawer slide making machine;telescopic drawer slide roll forming machine;channel drawer slide roll forming machine


  • Previous:
  • Next:

  • Write your message here and send it to us