Double Deck Roofing Sheet Roll Forming Machine
GENERAL INTRODUCTION:
Floor decking roll forming machine is manually used to produce steel floor decking and can produce high quality floor decking has advantages, such as no cutting deformation, high strength and a large working load. It can be directly mixed with the steel mesh and concrete with good adhesion. The main applications of decking sheets include thermal power plant, multilayer car shade parking, multi-story residential and commercial buildings such as shopping malls, bridges, platforms, walkways, mezzanines, silos, etc.
WHAT IS METAL DECK?
Metal decking is corrugated metal sheeting that’s used as a structural roof deck or composite floor deck. It will be supported by steel beams or joists The purpose of metal deck is to support the insulating membrane of a roof or to support and bond with the concrete to create a composite metal floor deck.
MAIN PARAMETERS:
Material ：Galvanized cold-rolled sheet
Yield strength of raw materials： ≤275Mpa
Tensile strength of raw materials： ≤550Mpa
Coil OD： ≤Ф1300 mm
Coil ID： Ф508
Strips width： ≤1450mm
Strips thickness： 0.8~1.2mm
Coil weight： ≤10000 kg
COMPOSITION:
| No | Items Name | Specifications |
| 1 | Decoiler | Single head mode, single support
Coil ID： Ф508 Coil OD： Ф1300mm Strips width： 1450 mm Max. weight： ≤10000 kg |
| 2 | Roll Forming Machine |
Structure: the forming unit is driven by motor reducer chain Forming stations:36 stations Forming machine shaft dia：φ95mm Motor power： 22kwX2 Max.： 15m/min |
| 3 | Hydraulic Cutting | The cutter mode adopts blanking shearing
Blade material ：Cr12MoV (hardness after quenching HRC58~62) Parameter ：cutting accuracy：±1.5mm |
| 4 | Electrical Control Cabinet |
Main electrical components: PLC: Mitsubishi Inverter: delta Touch screen: veron (Taiwan, China) Low-voltage electrical appliances: schneider (France) Encoder: Omron (Japan) |
| 5 | Hydraulic System | Hydraulic system USES filter, the cleanliness of oil to ensure 6-8 grade |
| Run-out Table | Size：3*1.2*0.6m
Adjustable Height |
FAQ:
Q1：What is the advantage of steel deck?
A1: Slabs made with steel decking have high structural strength compared to traditional concrete slabs. This creates a high strength-to-weight ratio which allows for a massive weight reduction
Q2：Are deck sheets safe?
A2：Deck sheet provides a stable and safe working platform to allow wet concrete to be poured. It can also be used as a composite floor system.
Q3: What is composite metal deck?
A3: Composite metal floor decking is metal floor deck with an embossment pattern manufactured into the sides (flutes) at regular intervals. The embossments allow the concrete to bond with the metal decking panel as the concrete cures.
Q4. What is the advantage of steel deck?
A4: Slabs made with steel decking have high structural strength compared to traditional concrete slabs. This creates a high strength-to-weight ratio which allows for a massive weight reduction
Q5: Are steel decks safe?
A5: In today’s time, a lot of people use it because of its exceptional durability, unbeatable strength, flexible design, safe construction, and so on. Apart from those, steel decks are economical, long-lasting, and an easy-to-install option for builders all around the world.
