Fully Automatic Storage Rack Roll Forming Machine
General Introduction:
This production line has the characteristics of high degree of automation, high efficiency, good stability, etc.; it has been used by many users in China and has won good customer reviews. The automatic production line of high-speed racking columns adopts fully automatic control, which greatly improves production efficiency and reduces labor intensity.
Parameters:
Configurations | 3T Manual Uncoiler(2 SETS), Roll Forming, Electric-Motor, Mould Cutting, hydraulic station, Control Cabinet |
Control System | Automatic Colored Touch ScreenDelta brand PLC Inverter |
Main Power | 7.5 KW |
Pump Power | 4 KW |
Power Supply | 380V, 3-Phase, 50Hz |
Forming Speed | 8-10 m/min |
Roll Station | 17 roller station |
Shaft Diameter | 57mm |
Feeding Thickness | 1.8mm |
Overall Size | About 7200×1200×1500mm |
Total Weight | Approximately 3600KGS |
Equipment Overview
1.The roller frame adopts an integral structure and is finished with precision processing. The distance between the upper and lower rollers is adjusted by the eccentric sleeve on the roller shaft. The locking device guarantees that the equipment is undecided. The upper and lower roller bearings are lubricated.
2.The casting arch is installed on the frame, and the distance is adjusted by rotating the screw. The forming machine uses a three-phase AC motor to drive the main reducer, which is installed in the middle of the forming machine. Drive the transmission box to drive in series, and the power is transmitted to the upper and lower shafts of the forming unit through the clutch. Necessary passes are equipped with upper and lower synchronization gears.
3.The roller frame adopts the archway structure with high rigidity; the positioning hole of the lower roller shaft of the archway adopts the fixed round hole positioning, and the positioning of the upper roller shaft adopts the sliding groove positioning. The roller shaft is made of high-quality steel and finished with precision processing to ensure assembly accuracy. The strength is sufficient, the shaft end is equipped with a bearing, placed in the bearing seat, and the whole is fixed on the arch slideway, and the gap between the upper and lower rollers is adjusted by the screw rod.
Machine Advantage
1.We adopts individual archway stands for rollers station, more strong and rigidity structure than other suppliers in china.
2.Individual gearbox for each archway rollers set, to assure the precision of the profile.
3.All of the machine main body and parts are quenched, with higher hardness(HRC58-62) and wear resistance, while other suppliers only rough steel welded.
4.The rollers material is American D2 and D3 standards, with long service life and low maintenance cost.
5.Professional Germany roller design software-Copra.
6.Long machine life, all of our machines can be used stable performance for more than 10-15 year, while other small and low quality supplier’s machine only can be used for 1-2 years