page_banner

product

RSL-6×2000 Metal Coil Slitting Production Line

The slitting line is also called slitting unit, slitting machine, slitting machine, and scissors. It cuts the metal coils into strips of various required widths, and then collects the strips into small rolls for the next process. It is a necessary equipment for precision cutting of transformers, motor industries and other metal strips.


  • youtube
  • facebook
  • twitter

Product Detail

Contact us

Production Description

The slitting line is also called slitting unit, slitting machine, slitting machine, and scissors. It cuts the metal coils into strips of various required widths, and then collects the strips into small rolls for the next process. It is a necessary equipment for precision cutting of transformers, motor industries and other metal strips.

Main Technical Parameters

A Data of Unit:

1 NameCNC Steel Coil Uncoiling, Slitting and Recoiling Line.

2.Working Processing

Prepare coil→ Uploading coil car→ Uncoiling→ coil Taking peeler Pinch rollHydraulic shear→ Looper Guider→ Slitting→ Scrap winding→ Looper Tail press →Separating →Tension →Feeding →Snubber roll →Recoiling →Unloading

B.Parameter of materials:

a)Input material parameters:

Material CR Steel & HR SteelYS.250MPaTS.450MPa
Material thickness 0.5mm4.0mm
Width 700mm2000mm
Coil ID Φ508mm、Φ610mm、Φ760mm
OD Φ1000mm~Φ2000mm
Weight Max.35000Kg

bOutput material parameters:

Recoil ID Φ610mm
Recoil OD Φ1000mm~Φ2200mm
Recoil Weight Max.35000Kg
Strip slitting capacity Max 25 stripsCoil thickness 2.0mmMax.12 stripsCoil thickness 3.0mmMax.8 stripsCoil thickness 4.0mm
Slitting width Min 32mm
Width accuracy ±0.10mm
Camber 0.5mm/1000mmCoil width100mm
Shear burr 0.04mmCoil thickness 1.0mm

    4%Coil thickness 1.0mm

Scrap Width 515mm
Coiling tolerance tower ±5.0mm

Inside and outside the 5-8 laps are not included

 

Detail Specification and Description of Equipment

1Coil storage

1Mechanical structure: The V-shaped frame structure welded by the steel plate, the support surface is covered with nylon, the center line of the equipment is symmetrically fixed to the left and right, and is installed at the forefront of the whole production line;

(2) Operating Function: Storage the steel coil transport by the crane to the uncoiler

3Storage capacity1 coils/line

4LoadingMax. 35000Kg

2 Coil Car

1Structure: The whole body is a four-wheel structure. The car body is divided into upper and lower parts. The upper support surface is covered with nylon to prevent the sheet from being scratched. The hydraulic cylinder controls the up and down movement. The four guide columns can effectively control the load. Rigid balance, the coil car moves through the motor, and the walking is accompanied by a drag chain;Running Speed 6m/min;

2Operation function: the coil car adjusts the position and the height of the coil so that the center of the coil is level with the center of the uncoiler until the unwinding mandrel is inserted into the inner hole of the coil to receive the coil;

3Loading weightMax. 35000Kg

4Loading width700mm2000mm

5Steel OD:Φ1000mm~Φ2000mm.

 

 


  • Previous:
  • Next:

  • Write your message here and send it to us