Firstly, as roll forming technologies advance, w beam highway guardrail roll forming machine has been developed to produce guardrails from galvanized steel of 482mm width and 2-4mm thickness. People install the guardrails as safety parts on the roadside or two sides of highway or expressway.And then , different countries may have different standards for high guard rails, however only minor changes on shapes or profile dimensions indicates, therefore, all the 2 wave or w beam highway guardrail roll forming machines have very much the same functions, and working process.
This machine used for punching, forming and cutting of the highway guardrail corrugated plate, which widely used in bridge, highway construction, Power Culvert , highway culvert , infrastructure construction etc. Highway guard rails are placed on the road side in order to prevent or decrease the loss caused by traffic accidents. Crash barriers or highway guard rails are so important that every each country will use them when building a highway. Therefore, a highway guardrail roll forming machine shall worth our time to know.