1. Uncoiler
The machine is a single-head mode. With single support, the motor drives the material shaft of the uncoiler to release the material roll, and the hydraulic power drives the tension device of the material shaft of the uncoiler to fix the material roll on the material shaft of the uncoiler.
2. Uncoiler Parameter
| Allowable coil inner diameter |
Ф508mm |
| Maximum allowable roll diameter |
Ф1600mm |
| Maximum allowable roll width |
500 mm |
| Maximum roll carrying weight |
≤5000 kg |
| Uncoiler motor power |
≈5.5Kw (subject to the final design) |
3. Leveling Servo Feeder
The front of the leveling machine is also equipped with a telescopic shovel head and a material pressing device to ensure that the raw material rolls enter the leveling machine smoothly and safely.
| Maximum working speed |
40 m/min |
| Maximum leveling roll width |
500mm |
| Adapt to the maximum roll thickness |
2mm |
| Motor power of leveling machine: |
≈7.5Kw(subject to the final drawing design) |
4. Roller Forming Machine
The forming unit adopts an independent frame (housing mode). Motor, reducer drive, gear and chain drive.
| Forming Passes |
about 13 |
| Shaft diameter of forming machine |
φ80mm（subject to the final design） |
| Motor Power |
about 55W（subject to the final design |
| Max. speed |
10~15m/min |
