China Factory for Shutter Roll Forming Machine - Stainless Steel Conductive Rail Roll Forming Machine – Raintech
China Factory for Shutter Roll Forming Machine - Stainless Steel Conductive Rail Roll Forming Machine – Raintech Detail:
MAIN TECHNICAL PARAMETERS
Plate: stainless steel (XCr17, must be adapted to 304 stainless steel at the same time)
Board thickness | 2~3mm |
Inner diameter of coil | Φ508 mm |
Coil straightness | 0.1-0.3mm/ m |
Length of finished product | 14.2m-18.2m |
Fixed length accuracy | ±2mm |
Linear speed | 2-6m/min |
Power supply | 380V±10%;50Hz |
Air pressure | 0.5MPa |
PRODUCTION PROCESS
Uncoiling → Feeding, Leveling → Cutting Head Pressing → Front Looper → Fixed-Length Feeding → Punching → Rear Looper → Cold Bending Forming → Correction → Cutting → Discharge-Stacking
The stainless steel coils are manually hoisted to the decoiler, the equipment is started, and the coils are manually fed into the leveler one by one, and the whole line starts production. The uncoiled strip is first leveled by a leveler, and then punched and imprinted on the strip by a punching machine, and then cold-bent formed in the roll forming unit, and the end of the forming unit completes the straightening of the profile. Then the profile is cut to a fixed length by a cutting machine, and the material is discharged through the discharging rack, manually packed, hoisted and transported into the warehouse.
MAIN COMPONENTS
It is mainly composed of uncoiler, straightening machine, shearing butt welding platform, front looper, servo feeder, punching punch, rear looper, roll forming unit, cut-to-length machine, discharge rack.
Uncoiler |
It is composed of welding frame, tensioning shaft system, motor reducer drive, pressing head and brake. |
Primer, Leveling machine |
Composed of shovel head, straightening head, leveling device, drive system, etc. |
Shear butt welding platform |
It is composed of a shearing machine, a pressing head, and a pressing platform (copper), with adjustable side rollers at the front and rear. |
Servo feeding |
Driven by servo motor, roller feeding |
Electrical control system |
PLC (Siemens) control |
APPLICATION
The roll forming equipment for subway conductive rails is mainly used to produce conductive rails. Mainly used in urban rail transit. Traditional conductive rails are made of low-carbon steel materials.
Product detail pictures:
Related Product Guide:
We can easily normally satisfy our respected buyers with our excellent high-quality, excellent selling price and good service due to we've been far more expert and more hard-working and do it in cost-effective way for China Factory for Shutter Roll Forming Machine - Stainless Steel Conductive Rail Roll Forming Machine – Raintech , The product will supply to all over the world, such as: Seychelles, Kuwait, Curacao, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
By Jerry from Zimbabwe - 2017.03.08 14:45
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By John from Boston - 2018.07.27 12:26