China New Product Corrugated Iron Guillotine For Sale - Two Wave Beam Highway Guardrail Roll Forming Machine – Raintech
China New Product Corrugated Iron Guillotine For Sale - Two Wave Beam Highway Guardrail Roll Forming Machine – Raintech Detail:
Product Description
Raintech highway crash barrier roll forming machine have three types： Separated W beam roll forming machine, separated three waves crash barrier roll forming machine; combined two and three wave machine . We have many successful cases for export highway guardrail plate roll forming machine and C post roll forming .The punching machine is equipped with two complete sets of punching & cutting moulds .
Three-wave (beam) guardrail plate is equipped with a set of punching &Cutting mould, Can finish the punching 28 holes at end the guardrail and cutting in one time
The specific mold specifications shall be confirmed according to the punch drawing signed and confirmed by the buyer and the seller
Main Parameters
| Material | Cold rolled mild steel
|
| Raw material yield strength | 235~355Mpa |
| Tensile strength of raw materials | 420~550Mpa |
| Coils OD | ≤Ф1600 mm |
| Coils ID | Ф508mm |
| Strips width | ≤750mm |
| Strips thickness | 2.3~3mm |
| Coils weight | ≤10000 kg |
| Line speed | 4 pcs/min（Length4320mm） |
Working Process
Uncoiling—– leveling primer —-looper (storage) —-servo leveling feeding —-400T punching and cutting machine + punching and reinforced hole press (three stations) —–conveying roller —–cold roll forming main process—-finished material
Basic Structure
Adopt hyraulic four-column press mode, economical and applicable, the speed of fast punching distance can be adjusted in the horizontal direction of the plate, and the punching distance can be changed through the electrical control system
Product Detail Description
Auto Decoiler:
The machine is single support mode, motor driven uncoiler material shaft to release the material volume, hydraulic power drive uncoiler material shaft tensioning device, the material volume is fixed on the uncoiler material shaft,the tensioning structure is wedge type,more stable and reliable working condition.
Loading Trolley:
The feeding trolley is of welded structure, and the motor driven trolley moves longitudinally on the ground facing the feeding shaft of the uncoiler, The motor driven trolley moves longitudinally on the ground facing the material shaft of the uncoiler；The coil surface supporting side of the trolley which driven by hydraulic cylinder moves up and down to place the coil on the shaft of the uncoiler
The supporting surface for the coil on the feeding trolley is v-shaped structure, and the surface is equipped with an anti-skid plate to avoid the coils creep down during the moving
Feeding trolley motor power：≈2.2Kw（according to the final design）
The feeding trolley contains two moving guide rails on which the trolley will be moved
Application
Adopt high speed die, produce different shape punch by using different station die (the punch die should be changed when the plate is changed), punch position can be adjusted separately, with reasonable structure, long service life and convenient adjustment
The hydraulic system of this punching machine is specially developed for multi-position punching machine. The hydraulic press adopts the control mode of pump accumulatoIt adopts special hydraulic control module, has the characteristics of fast blanking speed and low noise, and is equipped with a cooler for heat dissipation, to meet the needs of continuous production（This hydraulic system has been successfully used in many production lines）
Installation and commissioning:
1) The seller shall send installation and debugging technicians to perform debugging and installation services free of charge according to the buyer’s requirements.
2). 15 days prior to the delivery of the equipment, the seller shall provide to the buyer the external dimensions of the equipment, the floor plan, the installation ground plan, the electrical power supply requirements and the requirements for supporting facilities, etc.
3) After the equipment arrives at the destination and meets the installation conditions, the buyer shall promptly notify the seller, and the seller shall send 1-2 technicians to the buyer’s equipment installation site for installation and commissioning
(4) The seller shall be responsible for the commissioning of the equipment and shall guide the operators of the buyer in the pilot production until the personnel of the buyer can operate the equipment correctly and produce qualified products.
(5) Others: the buyer shall provide accommodation, transportation and other convenient conditions for our technicians. Engineers fees 80USD/day
Product detail pictures:
Related Product Guide:
We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way for China New Product Corrugated Iron Guillotine For Sale - Two Wave Beam Highway Guardrail Roll Forming Machine – Raintech , The product will supply to all over the world, such as: Ukraine, Suriname, Cyprus, With a fully integrated operation system, our company has won a good fame for our high quality products, reasonable prices and good services. Meanwhile, we have established a strict quality management system conducted in material incoming, processing and delivery. Abiding by the principle of "Credit first and customer supremacy", we sincerely welcome clients from home and abroad to cooperate with us and advance together to create a brilliant future.
By Honorio from Grenada - 2017.09.28 18:29
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Janet from Armenia - 2017.02.14 13:19
