Excellent quality Steel Coil Slitting Machine - Metal Steel Coils Slitting Production Line – Raintech
Excellent quality Steel Coil Slitting Machine - Metal Steel Coils Slitting Production Line – Raintech Detail:
MAIN TECHNICAL PARAMETERS
Slitting line for thin material
Model Parameter | Material Thicknes (mm) | Max.Coil Width(mm) | Slitting Strip Width (mm) | Slitting Speed(m/min.) | UncoilingWeight(Tons) |
SSL-1*1300 | 0.15-1 | 500-1300 | 24 | 50-150 | 10 |
SSL-2*1300 | 0.3-2 | 500-1300 | 12-30 | 50-200 | 15 |
SSL-2*1600 | 0.3-2 | 500-1600 | 12-30 | 50-200 | 15 |
SSL-3*1600 | 0.3-3 | 500-1600 | 8-30 | 50-180 | 20 |
SSL-3*1850 | 0.3-3 | 900-1850 | 8-30 | 50-180 | 20 |
SSL-4*1600 | 1-4 | 900-1600 | 6-30 | 50-150 | 25 |
SSL-4*1850 | 1-4 | 900-1850 | 6-30 | 50-150 | 25 |
Mini slitting line
SSSL-1*350 | 0.1-1 | 80-350 | 6-30 | 50-100 | 3 |
SSSL-2*350 | 0.2-2 | 80-350 | 6-30 | 50-200 | 3 |
SSSL-2*450 | 0.2-2 | 80-450 | 6-30 | 50-200 | 5 |
SSSL-2*650 | 0.2-2 | 80-650 | 6-30 | 50-180 | 7 |
Slitting line for thick material
Model Parameter | Material Thicknes(mm) | Max.Coil Width(mm) | Slitting Strip Number | Slitting Speed(m/min.) | UncoilingWeight(Tons) |
SSL-6*1600 | 1-6 | 900-1600 | 6-30 | 30-100 | 25 |
SSL-6*1850 | 1-6 | 900-1850 | 6-30 | 30-100 | 30 |
SSL-6*2000 | 1-6 | 900-2000 | 6-30 | 30-100 | 30 |
SSL-8*1600 | 1-8 | 900-1600 | 6-30 | 30-80 | 25 |
SSL-8*1850 | 1-8 | 900-1850 | 6-30 | 30-80 | 25 |
SSL-8*2000 | 1-8 | 900-2000 | 6-30 | 30-80 | 25 |
SSL-12*1600 | 2-12 | 900-1600 | 5-30 | 20-50 | 30 |
SSL-12*2000 | 2-12 | 900-2000 | 5-30 | 20-50 | 30 |
SSL-16*2000 | 4-16 | 900-2000 | 5-30 | 10-30 | 30 |
PRODUCTION PROCESS
Loading trolley → Uncoiler → Guide device → Traction leveling machine → 1#Swing bridge → Rectifying feeding device → Slitting machine → Scrap edge winder → Passing frame → 2#Swing bridge → Pre → separating device → Tightening machine → Feeding device → Sub-coiling shear → Steering drum → Rear axle → Winder → Discharging trolley → Auxiliary support → Hydraulic system → Electrical system
MAIN COMPONENTS
Loading/unloading trolley | There are two sets of trolleys, one for loading and one for unloading after slitting. |
Double support decoiler | Tighten the coil material on the reel, unwind or recover the unfinished coil material. |
Straight head feeder | The straight-head feeder is composed of a coil press roller, a bending roller, a shovel head, and a swing bridge. Each part is driven by an oil cylinder. |
Leveling tractor | When in line operation, the leveling tractor drives the decoiler reel to open the material. |
Swing bridge | There are two swing bridges, 1# pendulum bridge spans both sides of the pit;2#Swing bridge is located between the slitting machine and the tensioning machine. |
Correction machine | The correcting machine is used to guide the feeding direction of the sheet material. It is mainly composed of a vertical guide roller, a sliding seat and an adjusting screw. |
Slitting Machine | The slitting machine is composed of upper and lower knife shafts with cutter heads, fixed and movable supports, knife shaft spacing adjustment mechanism, transmission system, etc. |
Scrap winder | On both sides of the discharge side of the slitting machine, there is a waste edge winder, which is used to collect the waste edge material from both sides of the sheet. The width of the waste material winding is 5-20mm. |
Anticipating agency | At the turning point from the looper to the tensioner, a pre-separation mechanism is set up to prevent random materials |
Leading machine | There is a pair of feeding rollers in front of the tensioner to facilitate feeding the material head into the winder |
Tensioner | The tensioner exerts positive pressure on the slats to generate winding tension, which is convenient for tightening the slats. |
Material head (tail) shearing machine (2 sets) | Used for cutting head and intermediate sub-roll |
Approach bridge | Driven by the oil cylinder to lift and fall, it is used to introduce the material head into the winder drum after slitting. |
Material dividing and pressing device | The device is located above the reel of the winder and consists of a distribution plate and a pressing wheel shaft |
Winder | The winding machine is driven by a DC motor, and the speed is regulated by a DC speed regulator. |
Auxiliary support | The auxiliary support is a toggle mechanism, which is lifted or lowered by the hydraulic cylinder to push the swing arm |
Electrical System | The whole line adopts PLC for logic and real-time control of the whole line |
WORKPIECE SAMPLES
Product detail pictures:
Related Product Guide:
We've one of the most advanced generation tools, experienced and qualified engineers and workers, recognized good quality manage systems and a friendly skilled product sales workforce pre/after-sales support for Excellent quality Steel Coil Slitting Machine - Metal Steel Coils Slitting Production Line – Raintech , The product will supply to all over the world, such as: Slovakia, Sacramento, Houston, Corporate goal: Customers' satisfaction is our goal, and sincerely hope to establish long-terms stable cooperative relations with customers to jointly develop the market. Building brilliant tomorrow together!Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
By Fay from Guatemala - 2018.09.23 17:37
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Mario from Cape Town - 2017.12.02 14:11
Write your message here and send it to us