cut to length line safety operating procedures

In order to maintain the accuracy of the cut to length line, extend its service life, and ensure the safety of people and equipment, the following safety operating procedures must be strictly followed during operation:
1. Work clothes should be worn neatly, and female workers should wear work caps.
2. Before starting the machine, you must check whether the machine tool handle and operating parts are normal.
3. The materials should be clamped and clamped, and check whether the leveling and straightening equipment is turned on simultaneously.
4. After installing the materials, measure the center positioning and check whether the hole spacing is correct.
5. Must stop and change speed. When the machine tool is running, it is strictly forbidden to touch the material with your hands, and do not touch the mold and motor with your hands.
6. It is strictly prohibited to place workpieces, measuring tools, gloves and other items on the machine tool guide rails and molds.
7. You are not allowed to leave the machine tool after turning it on, and you must concentrate on the operation.
8. When leaving get off work, clean the machine tool, tidy up the area, and cut off the power of the machine tool. Lubricate machine tool gears.
9. During the processing, if you find that the machine tool has abnormal sound or malfunction, you should immediately cut off the power supply, diagnose the fault or notify the manufacturer.