How to avoid accidents when operating uncoiler machines?
The operator will certainly operate the uncoiler. However, it is possible to operate completely correctly, and the following Raintech Group shares with you the safety information about operating the uncoiler.
1, in the feeding operation, there should be a special person to cooperate with the forklift driver, so that the steel coil data is fundamentally consistent with the middle of the expansion reel shaft, and then the forklift driver gradually puts the steel coil data on the car.
2, the operator should rise or lower (hydraulic jack), adjust the steel coil data to the middle of the expansion and contraction shaft (that is, the data can enter the expansion and contraction shaft), and adjust the top movable bearing seat of the uncoiler at the moment, so that it is kept in the same level with the uncoiler.
3. Adjust the expansion nut to make the four arch plates and the expansion steel coil data to prevent the deformation and damage of the steel coil data during the operation.
4, when the steel coil data is expanded, the hand change the uncoiler, the investigation of whether the data can be changed calmly, to prevent various dangers in the operation.
5, the main drive and attached rotation can be carried out at the same time. That is, the lower stick rotation and the upper stick lifting movement can not be carried out at the same time.
6. The electrical system should be checked regularly. Dust. Replace the failed parts in time. Check that the ground cable is secure.
7, strictly in accordance with the operating procedures to use, do not make the machine overload or unreasonable use.
Post time: Mar-14-2024