OEM China Z Purlin Machine Manufacturers - Stainless Steel Conductive Rail Roll Forming Machine – Raintech
OEM China Z Purlin Machine Manufacturers - Stainless Steel Conductive Rail Roll Forming Machine – Raintech Detail:
MAIN TECHNICAL PARAMETERS
Plate: stainless steel (XCr17, must be adapted to 304 stainless steel at the same time)
Board thickness | 2~3mm |
Inner diameter of coil | Φ508 mm |
Coil straightness | 0.1-0.3mm/ m |
Length of finished product | 14.2m-18.2m |
Fixed length accuracy | ±2mm |
Linear speed | 2-6m/min |
Power supply | 380V±10%;50Hz |
Air pressure | 0.5MPa |
PRODUCTION PROCESS
Uncoiling → Feeding, Leveling → Cutting Head Pressing → Front Looper → Fixed-Length Feeding → Punching → Rear Looper → Cold Bending Forming → Correction → Cutting → Discharge-Stacking
The stainless steel coils are manually hoisted to the decoiler, the equipment is started, and the coils are manually fed into the leveler one by one, and the whole line starts production. The uncoiled strip is first leveled by a leveler, and then punched and imprinted on the strip by a punching machine, and then cold-bent formed in the roll forming unit, and the end of the forming unit completes the straightening of the profile. Then the profile is cut to a fixed length by a cutting machine, and the material is discharged through the discharging rack, manually packed, hoisted and transported into the warehouse.
MAIN COMPONENTS
It is mainly composed of uncoiler, straightening machine, shearing butt welding platform, front looper, servo feeder, punching punch, rear looper, roll forming unit, cut-to-length machine, discharge rack.
Uncoiler |
It is composed of welding frame, tensioning shaft system, motor reducer drive, pressing head and brake. |
Primer, Leveling machine |
Composed of shovel head, straightening head, leveling device, drive system, etc. |
Shear butt welding platform |
It is composed of a shearing machine, a pressing head, and a pressing platform (copper), with adjustable side rollers at the front and rear. |
Servo feeding |
Driven by servo motor, roller feeding |
Electrical control system |
PLC (Siemens) control |
APPLICATION
The roll forming equipment for subway conductive rails is mainly used to produce conductive rails. Mainly used in urban rail transit. Traditional conductive rails are made of low-carbon steel materials.
Product detail pictures:
Related Product Guide:
We hold strengthening and perfecting our items and repair. At the same time, we get the job done actively to do research and progress for OEM China Z Purlin Machine Manufacturers - Stainless Steel Conductive Rail Roll Forming Machine – Raintech , The product will supply to all over the world, such as: Los Angeles, Bandung, Ireland, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Coral from Cyprus - 2017.12.02 14:11
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Miriam from Karachi - 2018.12.22 12:52