Cut to length line is used to unwind, level, cut the metal coil into the required length and stack it. It is suitable for cut-to-length cross-cutting operations for processing cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel and various metal materials after surface coating.This production line has provided multiple lines for the welded pipe industry, sheet distribution industry, automobile industry, environmental protection industry, and metal sheet industry, with mature and reliable technology.
Technical Parameter
Model
Parameter |
Material
Thicknes (mm) |
Max.Coil Width
(mm) |
Cutting
Accuracy (mm) |
Max. Speed
(m/min.) |
Max.Cutting
Frequency (spm) |
Uncoiling
Weight (Tons) |
SCL-6*1600 | 1-6 | 800-1600 | ±0.5 | 40 | 40 | 25 |
SCL-6*1850 | 1-6 | 900-1850 | ±0.5 | 40 | 40 | 30 |
SCL-6*2000 | 1-6 | 900-2000 | ±0.5 | 40 | 40 | 30 |
SCL-8*1600 | 2-8 | 900-1600 | ±0.5 | 35 | 30 | 25 |
SCL-8*1850 | 2-8 | 900-1850 | ±0.5 | 35 | 30 | 30 |
SCL-8*2000 | 2-8 | 900-2000 | ±0.5 | 35 | 30 | 30 |
SCL-12*2000 | 3-12 | 900-2000 | ±1.5 | 30 | 15 | 35 |
SCL-16*2000 | 4-16 | 900-2000 | ±2.0 | 20 | 10 | 35 |
SCL-20*2000 | 8-20 | 900-2000 | ±2.0 | 20 | 10 | 35 |
Detailed Photos
Features of High Speed Cut to Length Line :
1. high speed cut to length line , speed can be 80m/min.
2. High leveling precision
3. It has a hard chrome plated surface and is durable and abrasion resistant.
4. It is used together with a hydraulic shear or an air-clutch shear to carry out fast shearing and convenient clearance adjustment.
5. raw material : CR HR, PPGI , SS
Post time: Dec-18-2023