OEM/ODM Manufacturer Simple Hydraulic Metal Slitting Line for Coil Steel Slitting and Cut to Length Line Machine
Our concentrate on is always to consolidate and enhance the excellent and service of present solutions, in the meantime regularly develop new products to meet distinctive customers’ demands for OEM/ODM Manufacturer Simple Hydraulic Metal Slitting Line for Coil Steel Slitting and Cut to Length Line Machine, We, with open arms, invite all interested potential buyers to visit our web-site or get in touch with us immediately for further information and facts.
Our concentrate on is always to consolidate and enhance the excellent and service of present solutions, in the meantime regularly develop new products to meet distinctive customers’ demands for China High Speed Slitting Machine and Cut to Length Line, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which might be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
MAIN TECHNICAL PARAMETERS
Cut to length line for thin material
Model Parameter | Material Thicknes (mm) | Max.Coil Width (mm) | Cutting Accuracy (mm) | Max.Speed (m/min.) | Max.Cutting Frequency (spm) | Uncoiling Weight (Tons) |
SRCL-2*650 | 0.2-2 | 100-650 | ±0.3 | 80 | 150 | 5 |
SRCL-2*800 | 0.2-2 | 100-800 | ±0.3 | 80 | 150 | 8 |
SRCL-2*1300 | 0.3-2 | 400-1300 | ±0.3 | 80 | 150 | 15 |
SRCL-2*1600 | 0.3-2 | 400-1600 | ±0.3 | 80 | 150 | 20 |
SRCL-3*800 | 0.3-3 | 100-800 | ±0.3 | 70 | 150 | 8 |
SRCL-3*1300 | 0.3-3 | 400-1300 | ±0.3 | 70 | 150 | 15 |
SRCL-3*1600 | 0.3-3 | 400-1600 | ±0.5 | 70 | 150 | 20 |
Cut to length line for thick material
ModelParameter | MaterialThicknes(mm) | Max.Coil Width(mm) | CuttingAccuracy(mm) | Max. Speed(m/min.) | Max.CuttingFrequency(spm) | UncoilingWeight(Tons) |
SCL-6*1600 | 1-6 | 800-1600 | ±0.5 | 40 | 40 | 25 |
SCL-6*1850 | 1-6 | 900-1850 | ±0.5 | 40 | 40 | 30 |
SCL-6*2000 | 1-6 | 900-2000 | ±0.5 | 40 | 40 | 30 |
SCL-8*1600 | 2-8 | 900-1600 | ±0.5 | 35 | 30 | 25 |
SCL-8*1850 | 2-8 | 900-1850 | ±0.5 | 35 | 30 | 30 |
SCL-8*2000 | 2-8 | 900-2000 | ±0.5 | 35 | 30 | 30 |
SCL-12*2000 | 3-12 | 900-2000 | ±1.5 | 30 | 15 | 35 |
SCL-16*2000 | 4-16 | 900-2000 | ±2.0 | 20 | 10 | 35 |
SCL-20*2000 | 8-20 | 900-2000 | ±2.0 | 20 | 10 | 35 |
MAIN COMPONENTS
COIL SKID | V- type, main body welded by steel plate |
COIL CAR | Pit type, main body welded by steel plate |
PAPER WINDER | Pneumatic expanded operated mandrel type.The paper winder will rewind the interleaving paper, as the strip is paid off. |
UNCOILER WITH SNUBBER ROLL | Cantilever with four segments type |
COIL OPENER | Telescopic and swing type |
HI LEVELER | 4-Hi, 15 rolls type |
LOOP TABLE | Swing type |
SIDE GUIDE | Vertical roll guide type |
FEEDER ROLL WITH MEASURING ROLL AND PVC COATER | 2+3 rolls type |
SHEAR | Mechanical type |
BELT CONVEYOR | Belt type |
PILER ,LIFTER ,CONVEYOR CAR | |
HYDRAULIC UNIT | 1 set |
PNEUMATIC UNIT | Pneumatic source:by buyer |
ELECTRICAL EQUIPMENT | Adjustment, manually, automatic operation mode. One key start-up, multi-machine synchronization. Speed adjustment.Line stop to cuts specified. Fault information display and diagnosis.Maintenance help. Emergency stop, fast stopStart alarm caution. |
WORKPIECE SAMPLES
Automatic cut-to-length production line is high-speed and precise with workstations for uncoiling, straightening, measuring, cross-cutting to length and stacking.
The machine consists of coil car, assisting support, decoiler, peeler device, leveler, coil guide, encoder scale, shearing machine, conveying table, stacker, output trolley, hydraulic system and so on.
The whole line is controlled by PLC with computer display.This line is highly automatic with good straightening effect, précising cutting, efficient production, reliable performance, easy operation and maintenance.