China Factory for Simple Metal Sheet Slitting Machine Steel Coil Roll Slitting Machine Line
We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for China Factory for Simple Metal Sheet Slitting Machine Steel Coil Roll Slitting Machine Line, Winning customers’ trust is definitely the gold key to our good results! If you are fascinated in our products, make sure you sense absolutely free to go to our web site or make contact with us.
We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for China Slitting Machine and Sheet Metal Slitter Machine, Our company has already had a lot of top factories and experienced technology teams in China, offering the best products, techniques and services to worldwide customers. Honesty is our principle, qualified operation is our work, service is our goal, and customers’ satisfaction is our future!
MAIN TECHNICAL PARAMETERS
Slitting line for thin material
Model Parameter | Material Thicknes (mm) | Max.Coil Width(mm) | Slitting Strip Width (mm) | Slitting Speed(m/min.) | UncoilingWeight(Tons) |
SSL-1*1300 | 0.15-1 | 500-1300 | 24 | 50-150 | 10 |
SSL-2*1300 | 0.3-2 | 500-1300 | 12-30 | 50-200 | 15 |
SSL-2*1600 | 0.3-2 | 500-1600 | 12-30 | 50-200 | 15 |
SSL-3*1600 | 0.3-3 | 500-1600 | 8-30 | 50-180 | 20 |
SSL-3*1850 | 0.3-3 | 900-1850 | 8-30 | 50-180 | 20 |
SSL-4*1600 | 1-4 | 900-1600 | 6-30 | 50-150 | 25 |
SSL-4*1850 | 1-4 | 900-1850 | 6-30 | 50-150 | 25 |
Mini slitting line
SSSL-1*350 | 0.1-1 | 80-350 | 6-30 | 50-100 | 3 |
SSSL-2*350 | 0.2-2 | 80-350 | 6-30 | 50-200 | 3 |
SSSL-2*450 | 0.2-2 | 80-450 | 6-30 | 50-200 | 5 |
SSSL-2*650 | 0.2-2 | 80-650 | 6-30 | 50-180 | 7 |
Slitting line for thick material
Model Parameter | Material Thicknes(mm) | Max.Coil Width(mm) | Slitting Strip Number | Slitting Speed(m/min.) | UncoilingWeight(Tons) |
SSL-6*1600 | 1-6 | 900-1600 | 6-30 | 30-100 | 25 |
SSL-6*1850 | 1-6 | 900-1850 | 6-30 | 30-100 | 30 |
SSL-6*2000 | 1-6 | 900-2000 | 6-30 | 30-100 | 30 |
SSL-8*1600 | 1-8 | 900-1600 | 6-30 | 30-80 | 25 |
SSL-8*1850 | 1-8 | 900-1850 | 6-30 | 30-80 | 25 |
SSL-8*2000 | 1-8 | 900-2000 | 6-30 | 30-80 | 25 |
SSL-12*1600 | 2-12 | 900-1600 | 5-30 | 20-50 | 30 |
SSL-12*2000 | 2-12 | 900-2000 | 5-30 | 20-50 | 30 |
SSL-16*2000 | 4-16 | 900-2000 | 5-30 | 10-30 | 30 |
PRODUCTION PROCESS
Loading trolley → Uncoiler → Guide device → Traction leveling machine → 1#Swing bridge → Rectifying feeding device → Slitting machine → Scrap edge winder → Passing frame → 2#Swing bridge → Pre → separating device → Tightening machine → Feeding device → Sub-coiling shear → Steering drum → Rear axle → Winder → Discharging trolley → Auxiliary support → Hydraulic system → Electrical system
MAIN COMPONENTS
Loading/unloading trolley | There are two sets of trolleys, one for loading and one for unloading after slitting. |
Double support decoiler | Tighten the coil material on the reel, unwind or recover the unfinished coil material. |
Straight head feeder | The straight-head feeder is composed of a coil press roller, a bending roller, a shovel head, and a swing bridge. Each part is driven by an oil cylinder. |
Leveling tractor | When in line operation, the leveling tractor drives the decoiler reel to open the material. |
Swing bridge | There are two swing bridges, 1# pendulum bridge spans both sides of the pit;2#Swing bridge is located between the slitting machine and the tensioning machine. |
Correction machine | The correcting machine is used to guide the feeding direction of the sheet material. It is mainly composed of a vertical guide roller, a sliding seat and an adjusting screw. |
Slitting Machine | The slitting machine is composed of upper and lower knife shafts with cutter heads, fixed and movable supports, knife shaft spacing adjustment mechanism, transmission system, etc. |
Scrap winder | On both sides of the discharge side of the slitting machine, there is a waste edge winder, which is used to collect the waste edge material from both sides of the sheet. The width of the waste material winding is 5-20mm. |
Anticipating agency | At the turning point from the looper to the tensioner, a pre-separation mechanism is set up to prevent random materials |
Leading machine | There is a pair of feeding rollers in front of the tensioner to facilitate feeding the material head into the winder |
Tensioner | The tensioner exerts positive pressure on the slats to generate winding tension, which is convenient for tightening the slats. |
Material head (tail) shearing machine (2 sets) | Used for cutting head and intermediate sub-roll |
Approach bridge | Driven by the oil cylinder to lift and fall, it is used to introduce the material head into the winder drum after slitting. |
Material dividing and pressing device | The device is located above the reel of the winder and consists of a distribution plate and a pressing wheel shaft |
Winder | The winding machine is driven by a DC motor, and the speed is regulated by a DC speed regulator. |
Auxiliary support | The auxiliary support is a toggle mechanism, which is lifted or lowered by the hydraulic cylinder to push the swing arm |
Electrical System | The whole line adopts PLC for logic and real-time control of the whole line |
WORKPIECE SAMPLES
A metal steel coil slitting machine is a special equipment used in the metal processing industry to cut or slit wide steel coils into narrower steel strips.
It is commonly used in industries such as automotive, construction and manufacturing that require narrow steel strips for further processing or production. The machine usually consists of a mandrel, uncoiler, slitter, recoiler and controller.